Floral Print Tassel Ties Vintage Boho Maxi Dress

A Floral Print Tassel Ties Vintage Boho Maxi Dress can be made at almost any price. What changes is how long it keeps its line and how much of the making shows. Buyers arrive with a reference photo and a target price. The two numbers that decide whether that price is reachable are the cloth weight and how many seams run through the tier seam. There is nothing experimental about this garment. The difficulty is discipline: the same four measurements decide fit on every size, and they have to be printed, not remembered. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch.

Ask for weight in gsm and composition as percentages, not trade names. Trade names do not travel well between mills. Approve colour under two lights, D65 and warm indoor. A black that reads neutral in an office can read green under shop lighting.

Where the shape comes from

The build follows the same order on every size. These are the steps where the shape is won or lost. Tiered skirts need every tier cut on the same grain and the gather ratio written down. Otherwise the volume changes between sizes. Trims and tassels go on after the first fitting. They change the weight of the hem and how the skirt falls.

The tier line reads as a design choice and behaves as a construction one. It changes the seam order, and sometimes the closure. Check the tier line after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift.

Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the tier seam to move at different rates. A size run that stops at XL will not sell where the middle size is a Large. State the run and the grade rule at quoting, not at shipping. Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the tier seam.

Specification, item by item

Failure points worth designing out

• Cord channels sewn too narrow, so the drawstring jams after the first wash.
• Print placement ignored at the centre front, so the motif lands off-centre in bulk.
• Tier seams pressed one way, making a ridge that reads through a light print.
• Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.
• Pressing decides the finish. A needle mark on a light cloth stays after QC, whatever the inspector does.

Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth. Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered.

Options on the table

• Sleeve: blouson, flutter, or straight with a ruffle.
• Tier count and depth, priced per configuration.
• Print: stock, custom digital, or placement-matched at the front.
• Neckline: square with ties, V with a modesty panel, or elasticated.
• Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.
• Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.

Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder. The fit sample is where the pattern is corrected. Changes after this point cost time, not only money.

Confirm the ship window against the mill calendar and the holiday shutdown before the purchase order is signed. Send the tech pack as a PDF with a measurement table, not as a photo with notes in a chat. Photos carry intent, tables carry production.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.