Sage Green Tassel Ties Floral Boho Maxi Dress
We see this style in two versions. One is built to hit a price, the other to keep its shape for three seasons. They differ by about fifteen percent in cost and by a great deal in what comes back. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch. There is nothing experimental about this garment. The difficulty is discipline: the same four measurements decide fit on every size, and they have to be printed, not remembered. Buyers arrive with a reference photo and a target price. The two numbers that decide whether that price is reachable are the cloth weight and how many seams run through the tier seam.
Request a shrink test on the actual dye lot. Half a percent across a maxi is visible to the customer and invisible on the sheet. Under 200 gsm, plan to interface the tier seam. Without it, the seam ridge shows through at the first press. Stretch is the quiet variable. Two percent elastane changes the grade rule, the seam type, and how the hem behaves after ten washes. We start with cotton voile or viscose crinkle on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form.
How it is built
The build follows the same order on every size. These are the steps where the shape is won or lost. Loose weaves need a French or flat-felled seam. A plain overlock shows at the slit and at the hem. Drawstrings are threaded after washing the sample. A cotton cord that shrinks will pucker the channel.
If the tier line is central to the style, price a second sample with a simpler version. Volume often goes to the simpler one. When the brief names the tier line, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain.
We fit the middle size on a live model, then check the smallest and the largest on real bodies, not on the form. Get the fit model measurements in the same units as the spec. Mixed units are the most common cause of a rejected first sample. Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the tier seam to move at different rates.
Specification, item by item
| Shell | a 90 to 120 gsm cotton voile, or a viscose crinkle for movement, swatch-approved, one dye lot for bulk |
| Body | boho maxi dress |
| Length | maxi |
| Colourway | green |
| Lining | bodice lined, skirt lined |
| Closure | stretch panel, no zip |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 15-20 days with handwork |
| MOQ | 100 pcs per colour |
The places this usually goes wrong
- Cord channels sewn too narrow, so the drawstring jams after the first wash.
- Gather ratios left to the operator, so two sizes of the same tier look different.
- Tier seams pressed one way, making a ridge that reads through a light print.
- Pressing decides the finish. A needle mark on a light cloth stays after QC, whatever the inspector does.
- A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.
Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered. Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth.
What we can change for you
- Sleeve: blouson, flutter, or straight with a ruffle.
- Neckline: square with ties, V with a modesty panel, or elasticated.
- Print: stock, custom digital, or placement-matched at the front.
- Tier count and depth, priced per configuration.
- Shell swap: the same block in a lighter or heavier cloth, priced separately.
- Private label: woven label, care label and hangtag to your artwork.
The proto is usually made in stock cloth. Do not judge the hand from it; judge the line. The fit sample is where the pattern is corrected. Changes after this point cost time, not only money. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use.
A sample order of fifty to a hundred pieces is enough to test the pattern, the cloth and the trims before a season is committed. A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.