Sage Green Tassel Ties Bohemian Maxi Dress
This is a style that rewards a patient first sample. Every shortcut taken on the block comes back later as a return, a re-cut or a discount. Most of the money in a Sage Green Tassel Ties Bohemian Maxi Dress sits in three places: the cloth, the tier seam, and the labour that keeps the waist seam flat after pressing. A Sage Green Tassel Ties Bohemian Maxi Dress can be made at almost any price. What changes is how long it keeps its line and how much of the making shows. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch.
We start with cotton voile or viscose crinkle on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form. Stretch is the quiet variable. Two percent elastane changes the grade rule, the seam type, and how the hem behaves after ten washes. Under 200 gsm, plan to interface the tier seam. Without it, the seam ridge shows through at the first press. Request a shrink test on the actual dye lot. Half a percent across a maxi is visible to the customer and invisible on the sheet.
Where the shape comes from
Most of the handwork sits in a handful of steps, and each one has a right order. Drawstrings are threaded after washing the sample. A cotton cord that shrinks will pucker the channel. Tiered skirts need every tier cut on the same grain and the gather ratio written down. Otherwise the volume changes between sizes. Measure a maxi from the waist once the skirt is gathered, not from the shoulder on the flat.
The tier line reads as a design choice and behaves as a construction one. It changes the seam order, and sometimes the closure. If the tier line is central to the style, price a second sample with a simpler version. Volume often goes to the simpler one.
Get the fit model measurements in the same units as the spec. Mixed units are the most common cause of a rejected first sample. Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the tier seam to move at different rates. Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the tier seam.
Spec sheet, line by line
| Shell | a 90 to 120 gsm cotton voile, or a viscose crinkle for movement, swatch-approved, one dye lot for bulk |
| Body | boho maxi dress |
| Length | maxi |
| Colourway | green |
| Lining | half lined to the hip |
| Closure | stretch panel, no zip |
| Size run | XS-2XL plus a curve block |
| Sample lead time | 12-18 days after spec sign-off |
| MOQ | 300 pcs per style |
Where this style fails in production
- Gather ratios left to the operator, so two sizes of the same tier look different.
- Tier seams pressed one way, making a ridge that reads through a light print.
- Print placement ignored at the centre front, so the motif lands off-centre in bulk.
- A cheap hem shows: three centimetres with a clean catch-stitch reads expensive, one centimetre overlocked reads fast fashion.
- The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.
Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth. Set stitch density at 12 to 14 per inch on woven seams and check it at the machine, not on the finished garment. AQL 2.5 on major and 4.0 on minor is a reasonable default here. Write it into the order so the inspection has a rule.
Options on the table
- Print: stock, custom digital, or placement-matched at the front.
- Sleeve: blouson, flutter, or straight with a ruffle.
- Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.
- Shell swap: the same block in a lighter or heavier cloth, priced separately.
Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder. Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use.
Send the tech pack as a PDF with a measurement table, not as a photo with notes in a chat. Photos carry intent, tables carry production. A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.