Turquoise Tassel Ties Boho Maxi Dress
There is nothing experimental about this garment. The difficulty is discipline: the same four measurements decide fit on every size, and they have to be printed, not remembered. It helps to separate what the customer sees from what the factory feels. The outside is cotton voile or viscose crinkle, the inside is structure, and the two have to agree on the same sample. A Turquoise Tassel Ties Boho Maxi Dress can be made at almost any price. What changes is how long it keeps its line and how much of the making shows. The first conversation about this style is usually about length. The second, if the buyer is serious, is about the inside: lining, interlining, and where the seams are pressed.
Wash the sample once before approval. Some cloths lose two centimetres of length and gain a surface that was not on the swatch. Ask for weight in gsm and composition as percentages, not trade names. Trade names do not travel well between mills. Stretch is the quiet variable. Two percent elastane changes the grade rule, the seam type, and how the hem behaves after ten washes. Request a shrink test on the actual dye lot. Half a percent across a maxi is visible to the customer and invisible on the sheet.
Structure and seams
Most of the handwork sits in a handful of steps, and each one has a right order. Lining a sheer maxi is a design decision, not a default. State the lining length separately or it will be made to the shell. Drawstrings are threaded after washing the sample. A cotton cord that shrinks will pucker the channel. Tiered skirts need every tier cut on the same grain and the gather ratio written down. Otherwise the volume changes between sizes.
When the brief names the tier line, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain. Check the tier line after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift.
For Boho Maxi Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. Shoulder and neckline decide whether a Turquoise Tassel Ties Boho Maxi Dress looks expensive. Both are set by the block, not by the sewing. If the buyer sells online, photograph the size chart on real bodies. That reduces returns more than any pattern change we can make.
What goes on the spec sheet
| Shell | a 90 to 120 gsm cotton voile, or a viscose crinkle for movement, swatch-approved, one dye lot for bulk |
| Body | boho maxi dress |
| Length | maxi |
| Colourway | buyer colourway, lab-dipped under two lights |
| Lining | bodice lined, skirt lined |
| Closure | stretch panel, no zip |
| Size run | S-3XL graded to your sheet |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 150 pcs per style |
Where this style fails in production
- Print placement ignored at the centre front, so the motif lands off-centre in bulk.
- Tier seams pressed one way, making a ridge that reads through a light print.
- Gather ratios left to the operator, so two sizes of the same tier look different.
- The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.
- Pressing decides the finish. A needle mark on a light cloth stays after QC, whatever the inspector does.
Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered. Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth.
Options on the table
- Tier count and depth, priced per configuration.
- Print: stock, custom digital, or placement-matched at the front.
- Neckline: square with ties, V with a modesty panel, or elasticated.
- Sleeve: blouson, flutter, or straight with a ruffle.
- Private label: woven label, care label and hangtag to your artwork.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.
Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use. The fit sample is where the pattern is corrected. Changes after this point cost time, not only money.
If the price has to come down, take it out of handwork before taking it out of the cloth. The customer notices the cloth first. Ask for two samples when the cloth is new to us: one in the buyer cloth, one in our closest stock cloth. The comparison usually settles the price question.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.