Welcome to Bafinasa official website!

Tassel Ties White Boho Maxi Dress

Source:News / Time:2026-11-14

It helps to separate what the customer sees from what the factory feels. The outside is cotton voile or viscose crinkle in white, the inside is structure, and the two have to agree on the same sample. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch. Written down, the request is tassel ties white boho maxi dress: a body, a length and a budget. Those three lines are enough to start a pattern, provided somebody writes the fourth line - the finish.

Wash the sample once before approval. Some cloths lose two centimetres of length and gain a surface that was not on the swatch. Ask for weight in gsm and composition as percentages, not trade names. Trade names do not travel well between mills. Stretch is the quiet variable. Two percent elastane changes the grade rule, the seam type, and how the hem behaves after ten washes. Request a shrink test on the actual dye lot. Half a percent across a maxi is visible to the customer and invisible on the sheet.

Where the shape comes from

The pattern sets the shape and the sewing protects it. A few steps decide whether it survives the third wash. Lining a sheer maxi is a design decision, not a default. State the lining length separately or it will be made to the shell. Measure a maxi from the waist once the skirt is gathered, not from the shoulder on the flat.

When the brief names the tier line, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain. The tier line reads as a design choice and behaves as a construction one. It changes the seam order, and sometimes the closure.

For Boho Maxi Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. On this style the difference between a good and a poor fit is usually two centimetres at the waist seam, not a redesign. Shoulder and neckline decide whether a Tassel Ties White Boho Maxi Dress looks expensive. Both are set by the block, not by the sewing.

Spec sheet, line by line

Shella 90 to 120 gsm cotton voile, or a viscose crinkle for movement, swatch-approved, one dye lot for bulk
Bodyboho maxi dress
Lengthmaxi
Colourwaywhite
Liningbodice lined, skirt lined
Closureconcealed side zip
Size runXS-2XL plus a curve block
Sample lead time15-20 days with handwork
MOQ100 pcs per colour

Failure points worth designing out

  • Gather ratios left to the operator, so two sizes of the same tier look different.
  • Tier seams pressed one way, making a ridge that reads through a light print.
  • Print placement ignored at the centre front, so the motif lands off-centre in bulk.
  • Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.
  • Every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Pressing is a step, not a rescue. A seam pressed open before the next one is sewn behaves differently from one pressed at the end. Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth. Keep one sealed bulk sample per colour. Six months later it is the only honest reference for a reorder.

Options on the table

  • Neckline: square with ties, V with a modesty panel, or elasticated.
  • Sleeve: blouson, flutter, or straight with a ruffle.
  • Tier count and depth, priced per configuration.
  • Print: stock, custom digital, or placement-matched at the front.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.
  • Shell swap: the same block in a lighter or heavier cloth, priced separately.

Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there. The fit sample is where the pattern is corrected. Changes after this point cost time, not only money. Sampling runs in three steps: a proto to check proportion, a fit sample to check the body, and a pre-production sample cut from bulk cloth.

A sample order of fifty to a hundred pieces is enough to test the pattern, the cloth and the trims before a season is committed. A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top