Welcome to Bafinasa official website!

Tassel Ties Bohemian Maxi Dress

Source:News / Time:2026-11-14

It helps to separate what the customer sees from what the factory feels. The outside is cotton voile or viscose crinkle, the inside is structure, and the two have to agree on the same sample. Written down, the request is tassel ties bohemian maxi dress: a body, a length and a budget. Those three lines are enough to start a pattern, provided somebody writes the fourth line - the finish. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch.

Ask for weight in gsm and composition as percentages, not trade names. Trade names do not travel well between mills. Cloth decides more than the brief admits. The same block in a 180 gsm wool blend and a 260 gsm double knit produces two different garments, one for the office and one for the evening. Wash the sample once before approval. Some cloths lose two centimetres of length and gain a surface that was not on the swatch. For cotton voile or viscose crinkle, order five to eight percent extra. Cutting around a shade band costs more than the cloth.

Structure and seams

The pattern sets the shape and the sewing protects it. A few steps decide whether it survives the third wash. Loose weaves need a French or flat-felled seam. A plain overlock shows at the slit and at the hem. Trims and tassels go on after the first fitting. They change the weight of the hem and how the skirt falls. Lining a sheer maxi is a design decision, not a default. State the lining length separately or it will be made to the shell.

When the brief names the tier line, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain. The tier line is where the eye lands first, so it is also where a two-millimetre error shows. Set it from the pattern, not from the sample.

Grading is where the quiet failures happen. Four sizes from one block need the armhole, the waist and the tier seam to move at different rates. On this style the difference between a good and a poor fit is usually two centimetres at the waist seam, not a redesign. If the buyer sells online, photograph the size chart on real bodies. That reduces returns more than any pattern change we can make.

Specification, item by item

Shella 90 to 120 gsm cotton voile, or a viscose crinkle for movement, swatch-approved, one dye lot for bulk
Bodyboho maxi dress
Lengthmaxi
Colourwaybuyer colourway, lab-dipped under two lights
Lininghalf lined to the hip
Closureinvisible centre-back zip
Size runXS-2XL plus a curve block
Sample lead time10-14 days on stock cloth
MOQ100 pcs per colour

Failure points worth designing out

  • Gather ratios left to the operator, so two sizes of the same tier look different.
  • Tier seams pressed one way, making a ridge that reads through a light print.
  • Print placement ignored at the centre front, so the motif lands off-centre in bulk.
  • The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.
  • Two rolls under the same colour name will not match. Buy one lot, keep the roll reference with the order, and cut the run from it.

Keep one sealed bulk sample per colour. Six months later it is the only honest reference for a reorder. Lead time is normally 12 to 20 days for a first sample and 30 to 45 days for bulk, depending on stock cloth and handwork. Measure ten pieces per size from the first bulk run. If the spread is wider than the tolerance, the cutting and not the sewing is the problem.

What we can change for you

  • Neckline: square with ties, V with a modesty panel, or elasticated.
  • Sleeve: blouson, flutter, or straight with a ruffle.
  • Tier count and depth, priced per configuration.
  • Print: stock, custom digital, or placement-matched at the front.
  • Shell swap: the same block in a lighter or heavier cloth, priced separately.
  • Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.

The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use. The fit sample is where the pattern is corrected. Changes after this point cost time, not only money. The proto is usually made in stock cloth. Do not judge the hand from it; judge the line.

A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together. Ask for two samples when the cloth is new to us: one in the buyer cloth, one in our closest stock cloth. The comparison usually settles the price question.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top