Rust Tassel Ties Floral Boho Maxi Dress
It helps to separate what the customer sees from what the factory feels. The outside is cotton voile or viscose crinkle, the inside is structure, and the two have to agree on the same sample. A Rust Tassel Ties Floral Boho Maxi Dress reads as a short brief until the pattern is cut, and the shape only holds when the tier seam, the waist seam and the hem allowance are settled together. Most of the money in a Rust Tassel Ties Floral Boho Maxi Dress sits in three places: the cloth, the tier seam, and the labour that keeps the waist seam flat after pressing. Nothing in this style is hard to sew. It is hard to sew consistently, which is a different problem and a more expensive one.
Request a shrink test on the actual dye lot. Half a percent across a maxi is visible to the customer and invisible on the sheet. The hand a buyer approves on a swatch is what bulk has to repeat. If the mill cannot repeat it, change the mill before the pattern is graded. Ask for weight in gsm and composition as percentages, not trade names. Trade names do not travel well between mills.
Structure and seams
The build follows the same order on every size. These are the steps where the shape is won or lost. Trims and tassels go on after the first fitting. They change the weight of the hem and how the skirt falls. Loose weaves need a French or flat-felled seam. A plain overlock shows at the slit and at the hem. Measure a maxi from the waist once the skirt is gathered, not from the shoulder on the flat.
The tier line is where the eye lands first, so it is also where a two-millimetre error shows. Set it from the pattern, not from the sample. We keep the tier line as its own pattern piece so it can be changed without re-cutting the body.
If the buyer sells online, photograph the size chart on real bodies. That reduces returns more than any pattern change we can make. For Boho Maxi Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. We fit the middle size on a live model, then check the smallest and the largest on real bodies, not on the form.
What goes on the spec sheet
| Shell | a 90 to 120 gsm cotton voile, or a viscose crinkle for movement, swatch-approved, one dye lot for bulk |
| Body | boho maxi dress |
| Length | maxi |
| Colourway | buyer colourway, lab-dipped under two lights |
| Lining | half lined to the hip |
| Closure | invisible centre-back zip |
| Size run | XS-2XL plus a curve block |
| Sample lead time | 12-18 days after spec sign-off |
| MOQ | 50 pcs sample order |
Where this style fails in production
- Print placement ignored at the centre front, so the motif lands off-centre in bulk.
- Gather ratios left to the operator, so two sizes of the same tier look different.
- Pressing decides the finish. A needle mark on a light cloth stays after QC, whatever the inspector does.
- Every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Set stitch density at 12 to 14 per inch on woven seams and check it at the machine, not on the finished garment. AQL 2.5 on major and 4.0 on minor is a reasonable default here. Write it into the order so the inspection has a rule. Schedule an in-line check after the tier seam goes on. Catching a rotation there costs minutes; catching it at final costs the order.
Customisation that does not break the price
- Neckline: square with ties, V with a modesty panel, or elasticated.
- Print: stock, custom digital, or placement-matched at the front.
- Tier count and depth, priced per configuration.
- Sleeve: blouson, flutter, or straight with a ruffle.
- Private label: woven label, care label and hangtag to your artwork.
- Packing: flat-fold with tissue, hanger-ready, or a sealed bag per piece.
Keep the approved pre-production sample sealed. It is the reference for the in-line check and for the reorder. The pre-production sample has to be cut from the bulk lot, with the bulk trims, on the machine settings bulk will use. The proto is usually made in stock cloth. Do not judge the hand from it; judge the line.
Ask for two samples when the cloth is new to us: one in the buyer cloth, one in our closest stock cloth. The comparison usually settles the price question. A reorder is easier than a first order, provided the approved sample and the measurement sheet were kept together.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.