Welcome to Bafinasa official website!

Tassel Ties Rust Boho Maxi Dress

Source:News / Time:2026-11-14

Nothing in this style is hard to sew. It is hard to sew consistently, which is a different problem and a more expensive one. Buyers arrive with a reference photo and a target price. The two numbers that decide whether that price is reachable are the cloth weight and how many seams run through the tier seam. We see this style in two versions. One is built to hit a price, the other to keep its shape for three seasons. They differ by about fifteen percent in cost and by a great deal in what comes back. It helps to separate what the customer sees from what the factory feels. The outside is cotton voile or viscose crinkle, the inside is structure, and the two have to agree on the same sample.

We start with cotton voile or viscose crinkle on the first sample and keep one alternative on the table, then compare how each hangs on a moving model rather than on the form. Under 200 gsm, plan to interface the tier seam. Without it, the seam ridge shows through at the first press. Lining is not a detail. A 65 to 75 gsm taffeta slides over the cloth; a cheap lining grabs it and the garment climbs when the wearer walks. Keep one dye lot for bulk. Splitting a thousand pieces across two lots is how a reorder ends up with a visible line between sizes.

Structure and seams

The pattern sets the shape and the sewing protects it. A few steps decide whether it survives the third wash. Tiered skirts need every tier cut on the same grain and the gather ratio written down. Otherwise the volume changes between sizes. Loose weaves need a French or flat-felled seam. A plain overlock shows at the slit and at the hem. Lining a sheer maxi is a design decision, not a default. State the lining length separately or it will be made to the shell.

When the brief names the tier line, allow extra cloth and extra time: it is cut from a separate panel and has to be matched for grain. Check the tier line after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift.

For Boho Maxi Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. A size run that stops at XL will not sell where the middle size is a Large. State the run and the grade rule at quoting, not at shipping. Get the fit model measurements in the same units as the spec. Mixed units are the most common cause of a rejected first sample.

Spec sheet, line by line

Shella 90 to 120 gsm cotton voile, or a viscose crinkle for movement, swatch-approved, one dye lot for bulk
Bodyboho maxi dress
Lengthmaxi
Colourwaybuyer colourway, lab-dipped under two lights
Liningunlined with faced seams
Closurestretch panel, no zip
Size runS-3XL graded to your sheet
Sample lead time12-18 days after spec sign-off
MOQ150 pcs per style

The places this usually goes wrong

  • Tier seams pressed one way, making a ridge that reads through a light print.
  • Cord channels sewn too narrow, so the drawstring jams after the first wash.
  • Every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
  • Pressing decides the finish. A needle mark on a light cloth stays after QC, whatever the inspector does.

Keep one sealed bulk sample per colour. Six months later it is the only honest reference for a reorder. Schedule an in-line check after the tier seam goes on. Catching a rotation there costs minutes; catching it at final costs the order. Packing flat or on hangers changes the crease pattern. Decide before the cartons are ordered.

Options on the table

  • Neckline: square with ties, V with a modesty panel, or elasticated.
  • Print: stock, custom digital, or placement-matched at the front.
  • Tier count and depth, priced per configuration.
  • Sleeve: blouson, flutter, or straight with a ruffle.
  • Shell swap: the same block in a lighter or heavier cloth, priced separately.
  • Shell swap: the same block in a lighter or heavier cloth, priced separately.

Sampling runs in three steps: a proto to check proportion, a fit sample to check the body, and a pre-production sample cut from bulk cloth. Photograph each stage on the same model and keep the photos with the spec sheet. Most disputes end there. The fit sample is where the pattern is corrected. Changes after this point cost time, not only money.

A sample order of fifty to a hundred pieces is enough to test the pattern, the cloth and the trims before a season is committed. Ask for two samples when the cloth is new to us: one in the buyer cloth, one in our closest stock cloth. The comparison usually settles the price question.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top